• Product Technical Parameters (产品技术参数)

1.1 Tracker (component 1) / 跟踪仪（组件1）

*   Tracking method: infrared camera real-time tracking

跟踪方式：红外照相式实时跟踪

*  Connection method: The tracker has a built-in high-performance processor and uses a cable to connect to the computer via a hub controller.

连接方式：跟踪仪内置高性能处理器，采用一根线缆经由集线控制器连接至计算机

*  Splicing method: transfer station splicing based on reference mark points (no need to paste mark points in single station measurement mode)

拼接方式：基于参考标记点进行转站拼接（单站测量模式下无需黏贴标记点）

*   Measurement volume: 16m³

测量体积：16m³

*   Measurement width: (3000 x 2500mm)@3000mm, up to 4000 x 3000mm

测量幅面：(3000 x 2500mm)@3000mm,最大至4000 x 3000mm

*   Working distance: 2m~4m

工作距离：2m~4m

*   Measurement rate: 60fps

测量速率：60fps

*   Volume accuracy: 0.06mm@9m³, 0.10mm@16m³

体积精度：0.06mm@9m³、0.10mm@16m³

*   Extended accuracy: 0.04mm+0.02mm/m, with CoordMeasis photogrammetry system

扩展精度：0.04mm+0.02mm/m，搭配CoordMeasis摄影测量系统

*   Measurement object: 0.1~10m recommended, usually no limit on workpiece size

测量对象：推荐0.1~10m，通常对工件尺寸不做限制

1.2 Scanner (component 2) / 扫描仪（组件2）

*   Scanning method (扫描方式): Laser handheld photographic scanning(激光手持照相式扫描)

*   Scanning technology: Laser line grid scanning technology (11 sets of blue cross lines + 1 blue and red straight line)

扫描技术：激光线网格扫描技术(11组蓝色交叉线+1蓝红色直线)

*  Transmission technology: wired mode and wireless mode are optional. Wireless mode supports device wireless synchronization and data wireless transmission.

传输技术：可选有线模式和无线模式，无线模式时支持设备无线同步和数据无线传输

*   Scanning area (扫描区域): 300 mm×240mm

*   Working distance (工作距离): 200mm~450mm

*   Scan rate: Measurement rate (扫描速率：测量速率): ≥1,300,000 measurements/second(次测量/秒)

*   Scan resolution (扫描分辨率): 0.05 mm

*   Measurement accuracy (测量精度): 0.03 mm

*  Volume accuracy: 0.02mm+0.06mm/m when used alone, 0.02mm+0.02mm/m when used with the CoordMeasis photogrammetry system

体积精度：单机使用时0.02mm+0.06mm/m，搭配CoordMeasis摄影测量系统时0.02mm+0.02mm/m

*   Laser category (激光类别): 2M (safe for human eyes/对人眼安全)

1.3 Light pen (component 3) / 光笔（组件3）

*   Measurement method (测量方式): contact measurement (接触式测量)

*   Connection method (连接方式): wireless connection(无线连接)

*   Measurement accuracy (测量精度): 0.06mm@9m³, 0.10mm@16m³

*   Measurement rate (测量速率): 60fps

1.4 The whole system (tracking scanning system) / 整机系统（跟踪式扫描系统）

*   Measurement method: Tracking measurement(测量方式): single-station measurement mode does not require pasting of marking points, transfer station measurement mode only requires a very small number of marking points to be pasted (跟踪式测量、单站测量模式下无需黏贴标记点，转站测量模式下只需黏贴极少量标记点)

*   Connection method: Connect all component devices into one through a centralized controller (supports setting the scanner to wireless connection mode)

连接方式：通过一台集线控制器将所有组件设备连接为一体（支持将扫描仪设为无线连接方式）

*   Splicing method: Splicing based on reference targets, supporting single station measurement and transfer station measurement

拼接方式：基于参考靶点进行拼接，支持单站测量和转站测量

*   Measurement range: up to 16m³ in single-station measurement mode, basically no range limit in transfer-station measurement mode

测量范围：单站测量模式下可达16m³，转站测量模式下基本无范围限制

*   Measurement rate (测量速率): 60fps

*   Volume accuracy (体积精度): 0.06mm@9m³, 0.10mm@16m³

*   Extended accuracy: 0.04mm+0.02mm/m, with CoordMeasis photogrammetry system

扩展精度：0.04mm+0.02mm/m，搭配CoordMeasis摄影测量系统

1.5 Wireless computing unit:(无线运算单元)

(1) Embedded computing and GPU hardware acceleration technology are used to transplant the front-end acquisition algorithm to the built-in computing core, which speeds up the scanning speed;

采用嵌入式运算和GPU硬件加速技术将前端采集算法移植至内置计算核心，扫描速度加快；

2. Wireless transmission of scanning data is achieved based on internationally advanced high-speed WIFI transmission technology;

基于国际先进的高速WIFI传输技术实现扫描数据无线传输；

3. Equipped with a large-capacity battery engine, the LCD screen displays the power level, the standby time is up to 8 hours, and the standby time in scanning mode is 3 hours;

搭载大容量电池引擎，液晶屏显示电量，待机时间高达8小时、扫描模式待机时间3小时；

4. Excellent structural design and heat dissipation design, the volume of the wireless computing device is 140mm×100mm×70mm, small in size, light in weight, and the maximum operating temperature is below 30 degrees;

优良的结构设计和散热设计，无线运算设备体积140mm×100mm×70mm，体积小，重量轻、最高工作温度低于30度；

5. Supports auxiliary functions such as portable shoulder bag and wireless terminal display, making scanning operations more convenient, smooth and easy;

支持便携式挎包和无线终端显示等辅助功能，扫描作业更加便捷流畅、轻松自如；

6. Integrating the three core functions of ultra-fast computing, wireless transmission, and cyclic charging, the wearable device is connected to the probe, free from the shackles of long cables, and the user experience is qualitatively improved compared to traditional devices

集成极速运算、无线传输、循环充电三大核心功能，可穿戴式设备与测头连接，摆脱长线缆羁绊，相较于传统设备用户体验有质的提升

1.6 Wireless optical contact measurement module:(无线光学接触式测量模块)

(1) The optical stylus probe can be precisely positioned through the three-dimensional optical device to perform contact measurement on the geometric features of the object surface;

光学触笔探头通过三维光学设备精准定位，可对物体表面几何特征进行接触式测量；

2. The light pen can be used to measure key measurement parts such as deep holes, grooves, thin walls, and reference features, thereby making up for the shortcomings of the three-dimensional scanning equipment in measuring these parts;

通过光笔可对深孔、凹槽、薄壁、基准特征等关键测量部位进行测量，从而弥补三维扫描设备对这些部位测量能力欠缺的短板；

3. It provides a unique intelligent point measurement function. There is no need to pull the trigger or click the software button. The software intelligently recognizes the light pen behavior and automatically points, thereby avoiding the adverse effects of light pen jitter caused by pulling the trigger on the measurement accuracy;

提供独特的智能测点功能，无需扣动扳机或者点击软件按钮，软件智能识别光笔行为进行自动打点，从而避免扣动扳机引起光笔抖动对测量精度的不利影响；

4. It supports the creation, editing, deletion, and export of basic geometric features such as points, lines, circles, planes, spheres, cylinders, and cones;

支持点、直线、圆周、平面、圆球、圆柱、圆锥等基本几何特征的创建、编辑、删除、导出等功能；

5. It supports the distance and angle measurement between geometric features such as points and lines, points and planes, lines and lines, lines and planes, and planes and planes;

支持点与直线、点与平面、直线与直线、直线与平面、平面与平面等几何特征之间的距离与角度测量功能；

6. It supports the light pen transfer measurement function based on the global framework, so as to adapt to the measurement conditions of larger or complex workpieces;

支持基于全局框架的光笔转站测量功能，从而适应较大尺寸工件或者复杂工件等测量工况；

7. It supports the automatic tracking function of rigid bodies and displays the 6-degree-of-freedom information of rigid bodies in real time.

支持刚体自动追踪功能，并且实时显示刚体6自由度信息。